Home > Endoscopy Processor >

Endoscopy Processor High Flow Insufflator 40L Medical Equipment

Product Categories

HK FY-MED TRADING CO., LIMITED

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Endoscopy Processor High Flow Insufflator 40L Medical Equipment

Ask Lasest Price

Add to Cart

Product Details
Company Profile

Endoscopy Processor High Flow Insufflator 40L Medical Equipment

The inflator maintains pneumoperitoneum under extreme conditions to ensure reliability during all laparoscopic procedures. In neonatal mode, it provides increased sensitivity for pediatric patients.

Details Of 40L High Flow Insufflator

Flow Rate: 40 Liters
Power Supply: 100-240 VAC; 3.15 A
Weight: 19.84 lbs
Dimensions: 5.83" (h) x 18.70" (d) x 12.52" (w)
Frequency: 50-60 Hz
Power Consumption: 150VA

Recommendations for Endoscopic Maintenance and Care

Do not place the endoscope together with other instruments and avoid touching other parts with the insertion part.

Wait until the endoscope angle returns to the 0-degree state before pulling out.

Since the insertion part is long, please be careful when cleaning and storing it, and be sure to confirm that it is not stuck beforehand.

When sterilizing EVIS endoscopes with ethylene oxide, remove the waterproof cap; when sterilizing other endoscopes with ethylene oxide, put on the ETO cap.

Wait until the endoscope angle returns to the 0-degree state, then pull out from the trocar needle and trocar.

When adjusting the angle of the insertion part, the angle should not be smaller than the range indicated in the instruction manual.

Please keep the sheath as straight as possible during operation.

Hold the insert gently and handle it carefully when taking it out.

Store the endoscopy equipment for sale in a dry and well-ventilated place at room temperature and in a clean condition.

Product Tags:

40L Endoscopy Processor

High Flow Insufflator Endoscopy Processor

Medical Equipment Endoscopy Processor

Endoscopy Processor High Flow Insufflator 40L Medical Equipment

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	HK FY-MED TRADING CO., LIMITED
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!